Cool
FlashLights
|
|
|
|
| |||||||||||||
|
TEKTITE® LED Bulb
|
The LT-1 is polarized. If it does not light in your flashlight: pull it out, rotate 180° (so that the pins are in the opposite holes) and reinsert the bulb. |
|
▲▲▲The first LED conversion bulb for the AA Mini Maglite
that uses
the ORIGINAL focusing reflector and does not void Maglite's warranty. No disassembly, drilling or modification needed, installs in seconds! A
true "drop-in" replacement. •Save Money – Go at least 15 hours between battery changes, more than 2 times longer than standard bulbs •Never change bulbs again! – Lasts more than 500 times longer than standard bulbs with a 10,000+ hour rated life •Impact Resistant – No fragile filament or glass bulb to break •See Better – Bright white light is similar to sunlight •Simple Installation – Just install the new bulb without disassembling the light or voiding the warranty •Protect the Environment – Creates less solid waste by using fewer batteries and bulbs •Replaces – Maglite® LM2A001 |
|
|
TEKTITE® LED Bulb
|
|
| ▲▲▲The new LPR-3, high-intensity Luxeon Star LED conversion bulb for 3 cell (4.5 V) flashlights, offers an easy way to convert many standard flashlights into extra high-intensity LED flashlights. This new bulb features the latest advances in LED technology to deliver a bulb that lasts more than 300 times longer than standard Krypton, Xenon or Halogen bulbs while also providing greatly increased battery life and a higher-quality white light that allows you to see better at night. In addition to providing long burn times and allowing you to see better, these new bulbs are also shockproof and vibration resistant. And because there is no filament to break or burn out, you will never be left without a working flashlight bulb again. | |
|
TEKTITE® LED Bulb
|
|
▲▲▲The new LPR-113, high-intensity Luxeon Star LED conversion lamp for 4
cell (6.0 V) flashlights, offers an easy to convert many standard
flashlights into extra high-intensity LED flashlights. This new bulb features
the latest advances in LED technology to deliver a bulb that lasts more than
300 times longer than standard Krypton, Xenon or Halogen bulbs while also
providing greatly increased battery life and a higher-quality white light
that allows you to see better at night. In addition to providing long burn
times and allowing you to see better, these new bulbs are also shockproof
and vibration resistant. And because there is no filament to break or burn
out, you will never be left without a working flashlight bulb again.
The LPR-113 will not work with 6-volt lanterns that have a negative (-) center bulb contact. Reverse the polarity of all batteries for use in the Tekna Lite 4 and Tekna I-Beam. |
|
